“Queensland Nut” Buster Nutcracker
The "Queensland Nut" Buster IS the Best Value Nutcracker you can buy.
The "Qld Nut" Buster makes very quick work of opening macadamia nuts & with a little practice, you'll be extracting whole macadamia nuts at a cracking pace.
AU$60 + postage & handling for Aussies
AU$54.55 + postage & handling outside of Australia
"Queensland Nut" Buster Jnr Nutcracker
Introducing The "Qld Nut" Buster Jnr Nutcracker
Jnr may be the smaller "Qld Nut" buster in the family but is as good at cracking the hardest nuts around, just like its older sibling.
AU$50 + postage & handling for Aussies
AU$45.46 + postage & handling outside of Australia
The “Queensland nut” or macadamia nut is a notoriously hard nut to crack, even with a conventional nutcracker.
The "QLD Nut" Buster makes very quick work of opening macadamia nuts & with a little practice, you'll be extracting whole macadamia nuts at a cracking pace.
Cracking these tough little nuts with a hammer can be downright dangerous with wayward nuts being sent in all directions inadvertently striking down small dogs and children that happen to be passing by. Then along came Nigel “The Nutcracker Man” Anthony and the ingenious
“Queensland Nut” Buster Nutcracker made right here in Qld Australia.
The “Queensland Nut” Buster Nutcracker is not just a macadamia nutcracker. It can be also be used on nuts such as pecans, hazelnuts and walnuts as shown in the video below.
Nigel Demonstrating the "Qld Nut" Buster
The “Queensland Nut” Buster Nutcracker handle and stands are made using durable hardwood from the Kwila (merbau) tree. At the head of the handle, there is a rubber sleeve that securely grips the nut while it is cracked. Once cracked, any remaining nut in the sleeve is removed using the ejection wire that is built into the head of the cracker.
The “QLD Nut” Buster stand includes a cracking plate and storage hole to protect the rubber from UV light.
There are no threads to strip or pins to break and is easier to use than any other macadamia nut nutcracker we’ve bought in the past.
How to use the “Queensland Nut” Buster Nutcracker
Insert the macadamia nut in the rubber sleeve on the Nutcracker. The rubber sleeve will open wider to take a larger nut – even a walnut
Hit the nut on the steel surface provided, or another hard surface (e.g. house brick or concrete block).
Push the wire on the back of the cracker to eject the nut. Remove any remaining shell before inserting the next nut.
Cracking Small Nuts with the “Qld Nut” Buster
HAPPY CRACKING FOLKS
Please email Rob via firstname.lastname@example.org if you'd like to arrange pickup & payment in person.
Prices may change without notice.
Rob Gray ABN 94 753 294 205